The Techie Spec Stuff...

General WildFire Information

‘WildFires’ are manufactured in Scotland.
When your fire arrives, it will have a coating of oil - this is to protect and 'season' the steel and will burn off when you first light the fire.
The colour of mild steel is a mid-grey. This changes over use.
Steel will weather over time to a natural rusty finish
When putting together, ensure that all panels are slotted together, this is best done on a flat surface,
When assembled, ONLY lift by way of the handles - do NOT lift or reposition when hot/burning.
For outdoor use only - all parts will become extremely hot when in use.
Should not be operated or placed on combustible surfaces when HOT.
Handle with care, use protective gloves and tools when hot.
Be careful of sharp edges.
Recommended to be stored indoors when not in use.
The optimum fuel for the ‘WildFire’ is logs.
Do not force large pieces of wood into the WildFire as it will jeopardise the integrity of the structure. Let it burn at its own pace, sit back and enjoy...

'WildFire Garden' Information

'WildFire Adventurer' Information

The Adventurer comes in 7 pieces - 6 for the fire (2 x decorative panels, 2 x handle panels, 1 x base with holes and 1 x top with log-feeding/pan hole and an ashpan,
Instructions are included
Each panel is made from 2mm thick, raw carbon steel.
Each boxed ‘WildFire Adventurer' weighs approx. 9kg.
Flat-packed and packaged, each ‘WildFire’ measures approx. 38 x 38 x 5cm (boxed).
When assembled, each 'Adventurer' measures approx. 30cm cubed,
The Adventurer comes with an ashpan: this will provide minimal protection from the heat, to the surface beneath. Use a bricks, stones or similar non-combustible items to raise above ground level and ensure it is level and not wobbling!
Turn the base panel over after each use to correct any warping due to over heating,

Email hello@ramblingscotland.co.uk if you have any questions.